Let’s start with the main features:
- Compact add-on device
- for 4 to 32 zones in steps of 4
- 24V DC control mechanism
- Operation via hot runner control devices
- Flexible visualisation
Needle valve-control – all in one mould data record
Ahead of the competition: Data visualisable via hot runner controller
One of the most recent Fiege electronic top performers is the newly developed needle valve-control of the NVS and NVS plus series. Combined with the temperature controllers of the TP and VARIO series (software version 3 and above), both the needle valve-control and the also newly developed Fiege pressure measurement system can be visualised through an existing hot runner control device. With this development, Fiege yet again sets the standard in terms of ease of operation. NVS is optionally available with end position control and can be used irrespective of the hot runner manufacturer.
Needle valve-control
Technical data
Housing:
Aluminium, colour RAL 5010 gentian blue, special colours available upon request
Dimensions/weight:
See table “equipment designs”
Channels:
4 to 32 in steps of 4
Operation/Visualisation:
via any hot runner control units of the VARIO, fitron TP or JETmaster TP series (software version 3.0 and above, download available under “Good to know”)
Switching outputs:
24V DC/1.25A = 30W per channel
Stroke control:
Up to 1,000 mm, accuracy 0.1 mm
Time control:
Up to 600s, accuracy 0.1s
End position control:
Solenoid valve monitoring with alarm notification
Control inputs:
Contact inputs for: Machine release, injection start and start holding pressure
Alarm notification:
Show on display as well as potential-free alarm contact on the control unit
Interfaces:
Ethernet to the control device VARIO, fitron TP or JETmaster TP, 1 x Ethernet to the external application
Mould connection:
Customised upon request
Power supply:
230 VAC +10…-10%, 50…60Hz, 1P / N / PE, other voltages upon request
Control fuse:
Safety fuse MT 6.3 A, 5 x 20mm
Power supply:
Mains cable with safety plug length 4 m
Ambient temperature:
Operation 0…+55°C, storage -30…+70°C
Climatic application class:
according to DIN 40 040, relative humidity 75% in the annual average, no condensation
Protective system:
IP20
Protection class:
I
Safety:
Manufactured according to IEC 348 (DIN VDE 0411)
CE Marking:
EMC according to 89 / 336 / EEC, EN 50081-2, EN 50082-2
Needle valve-control
The structure
User interface:
Thanks to its practical carry handles, this compact add-on device in a handy stack format can be easily transported.
- Hot runner controller
- Visualitation
- Needle Valve Control System
Device rear view:
Two standard Ethernet connections secure the connection to the hot runner controller as well as to the external application.
- Solenoid valve connection
- Power supply
- Way sensor connection
- Controlling signals of the machine
- 2 x Ethernet connection
